H1VPN Setup Guide

VPN Setup Guide

Whether you’re setting things up for the first time, switching devices, or troubleshooting an issue, start with the relevant section below. To connect one device first, follow the quick-start steps in the setup guide, then return here for data cycles, route selection, and maintenance.

About cross-border network acceleration

What your account, subscription, and client each do

H1VPN is a subscription service for cross-border network acceleration, with coverage in 110+ countries and 170+ routes. It supports Windows / macOS / iOS / Android / Linux. During setup, you’ll switch between the user panel and the client. Use the panel to manage your account, orders, plans, and subscription; the client reads the subscription, displays routes, and connects the device. Signing in to the panel in a browser doesn’t change the device’s network route. Likewise, closing the panel page doesn’t disconnect the client. To stop the connection, use the client.

A subscription gives the client access to route configuration. It isn’t a regular web page to open in a browser or your account password. Importing a subscription and selecting a route and connecting in the client are separate steps. Seeing routes in the client doesn’t mean an app’s traffic is using one. For your first setup, check each step in order: an active plan in your account, a subscription and routes in the client, then the actual task in the app. If something goes wrong, identify the step that wasn’t completed and return to that section instead of starting over.

A route is a network path, not access permission for an app

A route’s region describes the network exit you select. It doesn’t change the region of your account with a destination service, your subscription benefits, eligibility, or content permissions. Work sites, AI tools, and video platforms each have their own login and regional rules. Even with the client connected, a site may ask you to sign in again or report that a feature isn’t available. To narrow down the issue, check whether the site opens, whether you can sign in, and exactly which feature fails. Recording these separately is more useful than saying a site simply won’t connect.

Your connection also depends on your local network and the destination service. On shared Wi-Fi, for example, you may need to accept the network’s access terms first. Workplace network policies may also prevent the client from connecting. Switching routes changes part of the path but won’t remove local network requirements. First, confirm you can open ordinary web pages while disconnected, then connect the service. If the internet doesn’t work even while disconnected, fix the network access issue first rather than using the accelerated connection to mask it.

Choose a task you can repeat as a baseline

Before installing anything, pick a website you can normally open that doesn’t require sensitive information. Note your current network, whether your browser has a proxy extension enabled, and whether you already have other network tools on the device. Keep these conditions the same during your first connection test. If the same page behaves differently before and after connecting, you’ll have a repeatable comparison. Changing networks, installing extensions, and adjusting client settings all at once makes it hard to tell which change caused the difference.

One account supports an unlimited number of devices online at the same time. Set up one device first, then move on to others; this helps separate account issues from device-specific settings. If the first device works but a later one can’t import the subscription, check the later device’s permissions, network, and subscription input before changing plans. If two devices both fail to refresh the same subscription, check its status and your plan in the panel before deciding whether to contact support.

Choosing a plan or data pack

Decide whether you want data to reset monthly or carry over

Monthly plans: ¥9.9/month for 60GB · ¥18/month for 250GB · ¥28/month for 500GB. Data resets monthly on your activation date; mid-cycle upgrades are prorated over the remaining days. When choosing a monthly plan, focus on whether your typical usage fits a tier—not just how much a single download or viewing session uses. Since data resets on your activation date, check the cycle details in your account when reviewing your balance. Don’t use the end of the calendar month to decide whether to renew or upgrade.

Data packs (use until depleted; never expire): ¥158/300GB · ¥358/1000GB · ¥658/3000GB. They’re a good fit if you want to save data for later but don’t have a regular usage schedule. Never expiring refers to the pack’s validity, not continued use after the data runs out. If your account shows multiple benefits, check which items are active in the panel and review each balance and its deductions. Don’t assume the order in which data is used. Before purchasing, compare the listed tiers on the plan pricing page, then check the actual order in your panel.

Choose a billing option based on how you use it
OptionTiming to checkBest suited to
Monthly planResets monthly on the activation dateRegular use with a fairly consistent monthly data pattern
Data packUse until depleted; never expiresOccasional use, with data left over for next time

Estimate data from your activities, not the number of devices

Browsing, reading documents, uploading attachments, and streaming video use different amounts of data. Start by separating routine work from occasional tasks. For routine work, look at a representative stretch of typical usage. For occasional tasks, account for things like operating system updates, syncing media, or temporarily watching high-definition video. Don’t use a day spent only reading web pages as a measure of an entire month, or assume a one-off large transfer happens every day. If you don’t have your own usage history, choose a plan that covers your main needs and check your balance after activation.

Unlimited simultaneous devices doesn’t mean each device gets a separate plan allowance. With multiple devices, keep an eye on the account’s actual balance and note which devices handle large transfers most often. An operating system’s network stats may include direct traffic or cover only that device, so they aren’t a reliable substitute for subscription usage in the panel. If your balance seems to be dropping quickly, pause nonessential syncing or downloads and observe the change while leaving other devices’ usage unchanged. Then decide whether to adjust the client mode or choose a different tier.

Tell low data, an expired cycle, and route performance apart

Plan tiers address billing and data needs; they aren’t a direct fix for access problems in a particular region. If you still have data but a page often fails at a certain time, check your local network, current route, and the app itself first. If every app disconnects and the panel shows that your balance or plan period doesn’t meet the requirements for use, then look into your plan. Mid-cycle upgrades are prorated over the remaining days. For the exact charge, check the order summary before submitting rather than estimating a payment from the tier price difference.

H1VPN offers a 14-day no-questions-asked refund. For eligibility details, see the Terms of Service. To resolve an order issue, find the relevant order in your account. Before purchasing, it can help to sum up your reason in one sentence—for example, regular work use, so you’re comparing data across a typical cycle; or occasional travel, so keeping unused data matters more. When renewing, compare that reason with how you actually use the service. If it still fits, there’s no need to change tiers just because you changed routes last time. If your needs have changed, choose again based on your current usage.

Create an account and check your order

Verify the page before saving your login details

Open the H1VPN user panel from the site navigation or the link on this page. Before creating an account, check that the browser address belongs to this site. Don’t enter your details on an unfamiliar page from a forwarded message. No email address is required; create an account with a username and password. Use a password you haven’t reused on other services, and save both the username and password in your password manager. On a borrowed device, don’t let the browser remember your login. Sign out when you’re done and check for any downloaded files you no longer need.

After submitting, check that you’ve reached your account page. If you see an input error, follow the prompt to check the fields; don’t keep creating new accounts for the same issue. Browser autofill may insert details from another saved login, and an input method may add spaces to the beginning or end of a username. Recognizing the username on screen doesn’t guarantee you’re signed in to the right account. If you already have an account, continue from the login page. When setting up another device, confirm which account is open before selecting a plan, so you don’t repeat the process from an empty account.

Match the plan name, data allowance, and order total

After signing in, open Plans in the panel and find the option you chose in the previous section. Before submitting, check whether it’s a monthly plan or a data pack, then verify the allowance, price, and listed items in the order. An old browser tab may still be open; both tabs could show plans but refer to different accounts or orders. Use the currently signed-in panel and current order summary as your source of truth. If you went back and changed your selection, read the summary again before paying. Don’t rely on your memory of the tier you picked.

Payment methods: Alipay / WeChat Pay / USDT. Follow the payment instructions shown on the order page. For USDT, check every requirement displayed for that order, including that the wallet address and network match. Don’t copy payment details from an old order or chat. If the payment screen shows a different amount or item from your current order, exit the payment flow and check the panel. Don’t send extra funds to another address. Before proceeding, you can close old payment pages that might cause confusion and keep only the order you’re paying for.

Finish the payment flow by checking its status in the panel

After payment, return to the panel and check both the order record and account overview. A completion message on the payment page confirms the payment provider’s result, but before importing a subscription, check that the panel has processed the order and added the plan you intend to use to your account. If the payment page closes while the order still shows as pending, check that you’re back in the original account and order, then refresh the status. Don’t immediately place the same order again just to make the page look up to date; that can make it harder to sort things out later.

If the issue persists, use support tickets in the user panel to provide the order ID, when the issue occurred, the payment method, and the status shown by both the payment provider and the panel. Include only what’s needed. Before attaching a screenshot, hide your subscription URL, password, full payment account details, and unrelated information. Distinguish “order not updated after payment” from “order processed, but the client can’t connect.” The first is an order status issue; the second usually involves subscription import or the device’s network.

Get your subscription and prepare to import it

Get subscriptions from the overview and clients from the downloads page

After confirming your account and plan, open the user panel overview and find the subscription option. If there’s a copy button, copy the subscription for your current account, then import it into the client on your device. For a device without a client, go to client downloads in the panel and choose the version for its operating system. On Windows / macOS / Android / Linux, sign in to get the client. For iOS, use the App Store link in the panel; the download option requires an active, unexpired plan. Getting the client and getting the subscription are separate steps. Access to the downloads page doesn’t mean setup is complete.

If the panel and client are on different devices, sign in to the panel on the device you’ll use and copy the subscription there. That way, you don’t have to send it in a chat or temporary document, where line breaks, link previews, or encoding could change it. If you need to copy it temporarily on the device, switch only between the panel and client. After importing, copy some unrelated text so you don’t accidentally paste the subscription elsewhere. If clipboard history or cross-device sync is enabled, check whether the subscription was saved there.

Check the import result and keep your subscription private

Some import links try to open an installed client. You can also use the client’s import-from-clipboard option or paste the subscription into its input field. Check the screen to make sure you’re adding a subscription, not searching for an individual route or entering account details. Once accepted, the configuration should appear in the subscription list, with routes visible after you select it. If the browser is still showing its original page, that doesn’t confirm the import succeeded. Switch to the client and check for the new configuration.

If copying fails, try again in the panel, then check whether your browser or system showed a clipboard access prompt. To check that the content isn’t empty, paste it into the client’s subscription field; don’t send it to a third party for inspection. A subscription URL may contain access credentials. Don’t include it in public screenshots, shared notes, terminal logs, or support requests. If you think it’s been exposed, check the account and subscription management options in the panel or ask support how to handle it. If the subscription changes, update every device that uses it.

Refreshing a subscription isn’t the same as deleting the setup and importing it again

When the client already has a working configuration, refreshing the subscription updates its details. Adding a new subscription may create another entry. Knowing the difference helps avoid multiple hard-to-identify entries for the same account. Before switching devices or troubleshooting, note the configuration’s local name and main use, such as work or travel. Don’t use the subscription text itself as the configuration name. If a new import fails, don’t rush to delete the original configuration if it still works. Note where the error occurred, then check that the new input came from the current account.

If no routes appear after import, check that you selected the subscription you just added and look for a refresh prompt. If the request failed, first make sure the panel opens over your regular network, then get the subscription again and check your plan status. If only this device fails, compare it with another configured device that can refresh. Change only one variable at a time. By the end of this section, you should be able to find your subscription on the target device and tell whether it has loaded routes. The next section covers platform-specific installation and permissions.

Import on each platform

Open the panel’s downloads section on the device you’re setting up and get the client for its operating system. After installation, return to the overview, copy the subscription, then switch to the client’s import option. Prompts and settings vary by operating system. Look for the relevant feature instead of searching for a setting with the same name as one on another platform. Each section below has the same goal: the subscription is present, routes are visible, and the device allows the connection. We’ll test access in your target app in the next section.

Check import and connection permissions by device
PlatformWhere to get itCheck first
WindowsClient downloads in the panelCheck whether an old proxy or network tool is still running
macOSClient downloads in the panelConfirm the system permission requested by the client
iOSApp Store link in the panelPaste prompt and VPN configuration permission
AndroidClient downloads in the panelVPN permission and existing VPN configurations
LinuxClient downloads in the panelProcessor architecture, permissions, and connection mode

Windows: Make one manual connection first

After installing and opening the client, import the subscription copied from the panel and wait for the route list to load. Select a route and connect manually; there’s no need to set up launch at startup yet. If nothing changes in the browser, quit other similar tools or turn off any browser proxy settings you enabled, then test again. Don’t remove workplace settings or system policies as a shortcut. For guidance on global proxy, split tunneling, and startup options, see Windows VPN use cases compared. Until you’ve confirmed manual connection and disconnection work, having a clear way to restore your settings matters more than automation.

macOS: Separate installation permissions from connection permissions

Get the client from the panel, install it as prompted by the system, open it, and import your subscription. If macOS asks to approve a network configuration when you connect, check that the request came from the client you just opened, then approve it as prompted. If you previously canceled, try connecting again from the client or check for a related prompt in System Settings. There’s no need to reimport a subscription the client has already read successfully. If your workplace manages the device and restricts installation or network configuration, ask your administrator what’s allowed. Don’t change its management settings.

iOS: Install the app, then allow it to add a configuration

Once you have an active plan, open the App Store link from the panel. After installing the app, return to the panel, copy your subscription, and import it in the client. If iOS asks whether to allow pasting, check that it matches the action you just started before choosing. After the routes load, try connecting and allow the client to add a VPN configuration when prompted. If you previously denied permission, the subscription may still be listed; try connecting again to trigger the permission request. Seeing routes doesn’t mean you’re connected. For detailed screen-by-screen steps, see the iPhone VPN setup guide.

Android: Check which app is managing the connection

Open the client you got from the panel, copy and import the subscription. The first time you connect, Android may show a VPN connection request. Check the app name and confirm. If another VPN is already running on the device, disconnect it in its app first, then try connecting with the H1VPN client. If disconnections happen only after the screen locks, check the client status and Android’s background restrictions for the app. Don’t start by broadly disabling system protections. If a managed work profile has separate network rules, note how work and personal apps behave separately.

Linux: Check your system architecture and app routing

Before downloading, check your device’s architecture and the installation options shown in the panel. If you’re unsure of the architecture, run the read-only command below in a terminal, then choose from the options the panel actually offers. Install and open the client, import your subscription, select a route, and connect. If only certain apps can access the network, check the client’s current mode and whether the app uses the system proxy. Don’t assume that a terminal, desktop browser, and background service all use the same settings. For operations that require elevated permissions, follow trusted installation instructions; don’t run the entire client as an administrator just to troubleshoot.

uname -m

Connect to a route and verify the result

Establish a baseline before connecting

First, confirm you can open ordinary web pages on your local network. Then, in the same browser, visit Network Check and note the current exit details for your own comparison. Switch to the client, select the subscription it read successfully and a route, connect, and wait for the status to update. Reopen the check page in the same browser, then visit the target site you chose earlier. The check page shows the exit used by browser requests; it doesn’t prove every app uses the same path. Testing the target site tells you whether your intended use case works.

Don’t switch Wi-Fi networks and client routes at the same time. If changing networks also changes your original exit, you won’t know what caused the difference. A page may show a previous result, so reload it and wait for the lookup to finish. If the lookup itself fails, first check whether ordinary web pages load; an error on the check page alone doesn’t prove the connection failed. Note the route name and test time. If you need to share your notes, you usually don’t need to include the full exit address or account details.

Use what you observe to find the right step to check

If the client doesn’t show any routes, return to the subscription section and check the current configuration and refresh result. If routes are visible but the system says the connection wasn’t approved, return to the platform section and check permissions and other running tools. If the client says it’s connected but the check result hasn’t changed, first check whether the browser uses the route in the current mode and whether it has its own proxy settings. Don’t keep refreshing the subscription just because the exit hasn’t changed. Refreshing updates route details; it doesn’t check how an app connects.

If the browser exit changes and ordinary web pages load but a target app still fails, check whether the app can’t load at all or only fails during a specific step, such as signing in, uploading, or playing video. If the home page opens but you can’t sign in, check the service’s message about your account or access requirements. A single failed feature doesn’t mean the entire route is unavailable. If the browser works but a desktop app doesn’t, first check whether they use the same network mode. Once you know where the difference occurs, switching routes gives you a useful comparison instead of a guess.

If something goes wrong, return to the last known working state

If pages load slowly during peak hours, try a backup route for the same use case and repeat the same task on the same network and app. Note how both routes perform, but don’t treat one test as a long-term guarantee. If ordinary web pages stop opening after you switch, return to the route that worked or disconnect the client, then check whether your direct connection is back. If direct access also fails, check your local network. If direct access works but connecting doesn’t, investigate permissions, mode, route, and subscription.

Finish by testing disconnection. Stop any active transfers, disconnect in the client, then use the same browser to check the network exit again and open the same ordinary web page. If an app still behaves oddly after disconnecting, check whether you changed system or browser proxy settings and restore them using your notes. Follow your administrator’s instructions for managed network settings. You’ve mastered the everyday setup when you can connect and return to your usual network state. If the same issue keeps coming back, note the steps that reproduce it and check the FAQ sections on connections and troubleshooting.

Everyday maintenance and renewals

Check your remaining data separately from your plan cycle

When you open the account overview, first check which plan is active, then review your remaining data and cycle. Monthly plans reset on the activation date. If your balance hasn’t returned when you expected, check the activation date and cycle shown in the panel rather than calculating from the calendar month. Data packs can be used until depleted and never expire, so check whether the remaining balance will cover your next use. Having enough data and having an active plan are separate checks. If you can’t connect, verify both.

To find out why your balance is dropping, check the panel before and after typical tasks, noting which devices were online and whether any large transfers were underway. Don’t use two observations from different periods to estimate a fixed data cost for one app. Background sync, video quality settings, and system updates can all change usage. If your usage keeps differing from your usual pattern, pause tasks that can wait one at a time and check how the balance changes. This is usually more informative than turning off every device. The panel and device usage stats cover different things; use the panel for your plan balance.

Renewing, upgrading, and switching devices are different tasks

When you want to continue using the service, open Plans in the panel and check the options available for your account. Before placing an order, compare your current plan with the new one and decide whether you’re continuing as before, changing tiers, or switching to a data pack. Mid-cycle upgrades are prorated over the remaining days. Use the calculation shown in the current order before submitting. After payment, check the order status, then verify the plan and balance in the overview. Don’t clear configurations on all your devices first; that would add an unnecessary import round when you’re checking the order.

To switch devices, keep using the same account and follow the subscription and platform import sections to set up the new device. You don’t need a different plan just because you’re adding another device. After verifying the new device, remove account details from the old one. Before handing it over or retiring it, disconnect, sign out of the panel, delete saved subscriptions and client configurations you no longer use, and check whether the browser saved your login. Deleting a desktop icon or installer doesn’t necessarily remove configurations saved in the system.

Note what works before updating, then run a quick test

Before updating the client or operating system, note the name of your working configuration, your usual route, and connection mode. Don’t include the subscription URL in maintenance notes. Finish any meeting, file transfer, or form before updating. Afterwards, don’t immediately re-enable every automatic setting. First connect manually and open a familiar test page; confirm that pausing and disconnecting work too. If an update removed a configuration, get the current subscription from the panel and import it again. Don’t risk using an unfamiliar site to find an old version.

For a refund, H1VPN offers a 14-day no-questions-asked refund. Check the Terms of Service, then use a support ticket to provide the order details and your request. If you’re only planning to stop using a device, first confirm whether you need to sign out or disconnect; disconnecting doesn’t change the order status. Useful maintenance notes include when the service last worked, which plan cycle was active, and what changed afterwards. If the issue returns, you can start with the change instead of repeating every step from ordering through connection.

Route selection and advanced troubleshooting

Choose a region for your use case, then compare with a real task

Check regional details on the global server locations page. The options currently available in your client’s subscription are the source of truth. For document browsing, check whether pages load and save reliably. For meetings, watch for stalls or reconnects during the session. For video, check playback continuity, not just whether the home page opens. Note one regular choice and one backup. Before switching, finish anything that needs to keep the same session, as the destination service may treat a change of exit as a new login environment.

A nearby region doesn’t necessarily mean a better route, and one successful test doesn’t mean performance will be the same at every time of day. If issues happen in the evening, retest around the same time, on the same device and network. Change the route first, then consider changing networks. Client groups and route names can help you identify the options you’ve compared. Don’t infer route type, performance, or guaranteed platform access from a name alone. For tips on choosing a Japan route and understanding platform availability, see the guide to Japan routes and streaming platforms.

Before configuring split tunneling, check who manages the app

If your client offers per-app or rule-based routing, start with a clear goal: which requests should use the route, and which should stay on your local network? In a workplace, for example, some internal services may depend on the company’s network exit. Don’t change how the whole device connects just to fix one external site. Note the original mode before changing it, then test one target app and one ordinary web page. If you can’t tell whether the rule is working, restore the original mode to verify it before testing individual settings.

The system proxy, an app’s own proxy, and a VPN configuration don’t necessarily follow the same rules. If a browser works but a terminal doesn’t, don’t use the browser’s result as a substitute for testing the terminal. Similarly, a terminal resolving a domain doesn’t prove the app used the intended route. An app may also keep an old connection open. Finish your current task, restart the relevant app, then test the same path instead of restarting every device or enabling other network tools. Change one thing and retest to establish cause and effect, so you know whether it’s safe to keep the setting.

Keep a record you can use to check intermittent issues

A useful troubleshooting note includes the device operating system, local network type, selected client route, task that failed, exact error message, and what happened after disconnecting or switching to a backup route. For example, “Ordinary web pages load in the browser, but the target app is stuck on the login screen; the same prompt appears on the backup route” is more useful than “The network is slow.” If the issue appeared after waking the device from sleep, changing networks, or leaving a shared hotspot, note that trigger too. You don’t need to repeat a payment or share your subscription, password, or destination site account details to reproduce the issue.

Time of issue:
Device and current network:
Client mode and route name:
Action that failed and error message:
Result after disconnecting:
Result after switching routes only:

If you can reproduce the issue reliably, check the FAQ, then submit these notes through support tickets in the user panel. If only one feature on a specific account is affected, while other pages and tests using the same exit work normally, check the destination service’s own account requirements and status updates too. If restoring the default settings fixed the issue, repeat the same task to confirm, then restore only the custom settings you actually need. If something similar happens later, you’ll have a known working setup to start from instead of repeatedly changing unrelated settings.

Start Free