Guides About 5 minutes

VPN FAQs for Beginners: 10 Common Questions Answered

Can you connect multiple devices? How is data usage measured? Are there speed limits? Do you need to stay connected? Get answers to 10 common questions about using a cross-border network service for the first time.

Can you use multiple devices at the same time?

H1VPN lets you connect an unlimited number of devices at once. You can keep using your tablet while your computer is in a meeting. Device count and data allowance are separate: unlimited devices doesn’t mean unlimited data, or that each device gets its own allowance. Check your dashboard for total usage rather than relying on one device’s local counter.

If a new device won’t connect, keep a working device online for comparison. On the same network, check that the new device has a route selected and that you allowed the system to add its configuration. If only the new device fails, check its permissions and client settings first; there’s no need to disconnect your other devices.

How does plan data get used?

To work out which activities may use your plan data, check whether they go through the service’s routes. Downloads, uploads, video calls and cloud syncing can all use data; closing a browser tab doesn’t necessarily stop background transfers. With split tunneling, requests sent directly by the rules don’t pass through the service’s routes. So don’t count all network activity shown by your system as plan usage.

If your balance is dropping faster than expected, note the reading in your dashboard, pause cloud sync, system updates and video playback, then do one everyday task and check the dashboard again later. The client’s local statistics may use a different measurement scope, so use the dashboard as the source of truth for your balance. When choosing a plan, estimating data from your typical tasks is more useful than estimating by time connected.

Does a slower connection mean you’re being throttled?

Not necessarily. Speed depends on your local network, the route and the destination server. A page that takes a long time to start loading is different from a large download that starts but runs slowly. One speed test can’t prove that traffic is being throttled. To check for plan limits, review the plan details and any notices in your dashboard, then compare results.

Choose the next check based on what you’re seeing
What you’re seeingWhat to try firstHow to interpret the result
Slow both before and after connectingOn the same device, switch to another local network and test the same website that’s accessible on both networksIf it works on the other network, investigate the original network first
Multiple sites are slow on the same routeKeep the network and client mode unchanged; switch only the routeIf it works on the other route, note the original route and when the issue occurred
Only one website is slowOn the same route, open another website and compare loading timesIf other sites work normally, check the affected site or the path to it

When comparing results, change one thing at a time. If you switch networks and routes and clear the cache all at once, you won’t know which change fixed the problem.

Do I need to keep my VPN connected all the time?

No. If you only need it for specific tasks, connect before you start and disconnect when you’re done. If you switch between local and international services throughout the day, you can stay connected and use split tunneling to route each app according to the rules. Whether to stay connected depends mostly on your work habits, not whether your device supports launch at startup.

Staying connected may lead to more background activity and battery use. If you enable launch at startup, restart your device manually and check that the client not only opens but also selects the route you want. Launch at startup, auto-connect and reconnecting after a drop are separate features; an app icon at startup doesn’t mean you’re connected.

How do I import a subscription link into a client?

  1. First, check the client page in your dashboard to find the software for your device. Then sign in to the dashboard and get your subscription from the Overview page.
  2. In your client, look for “Subscription Management,” “Configuration” or “Import from URL.” Menu names vary by platform. If the client distinguishes subscription URLs from single-node URLs, use the subscription option.
  3. After importing, refresh the configuration and check that selectable routes appear in the list. Choose a route and connect. If the system asks permission to add a network configuration, first make sure the prompt came from the client you just opened.

What’s the difference between global proxy and split tunneling?

Global proxy typically sends all requests covered by the client through the same proxy route. Split tunneling uses rules—such as domains, addresses or apps—to decide whether a request goes through a route or connects directly. The rules available depend on the client. Global proxy may not handle all traffic on a device: if the client only configures the system proxy, apps that ignore system proxy settings may still use their original route.

If your browser works but a desktop app won’t connect, check whether the app follows the system proxy and whether the client has a mode that routes that app’s traffic. Don’t assume the route is broken if the app isn’t using the proxy. If work resources depend on a company network or dedicated client, check your organization’s network requirements before changing split-tunneling rules.

How can I confirm the connection is working?

Before connecting, open Network Check and note the outbound address shown in your browser. Connect, reload the same page in the same browser and compare the results. If your current mode routes the test request through the service, a changed outbound address is evidence that this request used the route. With split tunneling, the address may stay the same if a rule sends the test page directly.

Next, try a task in the app you actually want to use, such as opening a document or joining a test meeting. A browser test only shows the route used for that web request; it can’t confirm that other apps or DNS queries use the same route. If you’re checking whether DNS follows the intended path, review the client’s DNS settings and run a DNS resolution test separately.

Should I choose the route with the lowest latency?

Not necessarily. Latency measured by the client reflects response time to its test target, which may differ from the response time to the site you need. It also doesn’t tell you about throughput or stability. For voice calls, check for clear audio and frequent reconnects; for file transfers, see whether the transfer completes steadily. Testing different routes with the same task is more reliable than picking the smallest number in the list.

You don’t need to memorize protocol names first. Shadowsocks, Trojan and Hysteria2 are not route locations. Whether a client can use them depends on its support for the protocols and configuration in your subscription. Before choosing a route, make sure the configuration loads correctly, then test your task at the time you’ll actually use it. Don’t infer speed from a protocol’s name.

Connected, but websites won’t open. What should I check first?

  • ✅ Disconnect and open a site you can usually access directly. If that fails too, check that your local network is working and whether a public Wi-Fi network requires you to sign in through a browser first.
  • ✅ If your local network works, reconnect and test other websites. If only one site fails, note the error and work out whether the domain can’t be resolved, the connection timed out or the site returned an error page.
  • ✅ If your browser works but an app doesn’t, check whether a split-tunneling rule is sending the app directly and whether another app on your device is also changing proxy settings.
  • ❌ Don’t ignore a certificate warning just to get a page to open. Check the URL and your device’s date and time, then use the warning to help identify the issue.

How do I know if a plan is right for me before I start?

Start with what you’ll use it for: occasional research, frequent video meetings and regular large file transfers have different data and stability needs. Test your most-used devices and apps to make sure they can handle your tasks, then compare plans against the usage shown in your dashboard. H1VPN’s monthly subscriptions and data packages are listed on the plans page, and data packages don’t expire. You can use H1VPN without an email address, and the service offers a 14-day no-questions-asked refund.

A good order for beginners: First, make sure the configuration imports. Then check that your usual apps follow the expected route. Finally, confirm your tasks work and the plan’s data allowance suits your needs. Assess device count, data and speed separately; one can’t stand in for another.

Start Free